Electrical restoration kit

The electrical restoration kit is used for the restoration of the car-elektric under her consideration, to injure the authenticity minimally, and nevertheless to consider the security of the present-day traffic's.

Figure 1: Complete electrical restoration kit.

Deviations opposite the original cabling:

All circuits through fuse safeguarded.
Additional low beam, integrated in the lighting switch.
Low beam and headlights controlled by relay.
Stop light switch and stop lights (optional), plus cables for the stop light.
Flashing light switch and flashing lights (optional), plus cables for flashing lights.

High-quality textile braided vehicle-cables are used, which in color and cross-section and equips with soldered cable-shoes, are comparable with the original-cables. The cables and their components are laid at the visible places as far as possible to the original. An easily comprehensible installation-instruction is attached.

Figure 2: Confected cables

The electrical restoration kit is based on the original-components (dynamo, starter, light switches, ammeter, starter-switch, battery, magnetos) and their original places at the vehicle.

Figure 3: Electrical board with fuses box, relay and indicator generator.

Figure 4: Supplied cabling auxiliary device

The electrical restoration kit consists of three parts:

Basic-kit:
This includes all cables and components for the power supply, horn and lighting. In it contain also the electric panel with fuses and relay as well as the conversion kit for the lighting switch.

Contained:
21 pieces confected cables for light in the front and behind, magnetos, amperemeter, horn, dynamo,
2 pieces battery-cables,
1 piece starter-cables,
1 piece electrical board with 2 pieces 6V BOSCH-relay and fuses box with 7 fuses,
6 pieces cable-clamp (3099) for light,
1 piece light switch (rebuilding-kit),
8 pieces cables clampe in 3 sizes with screws,
1 piece terminal block with 2 connections (3642) for horn,
1 piece terminal block with 4 connections behind.

Extention direction indicator:
All necessary cables as well as flasher unit and flashing light switch also optional front and rear flashing lights are available.

Contained:
5 pieces confected cables for indicators left and right as well as in the front and behind,
1 piece indicator generator,
1 piece indicator switch BOSCH,
2 pieces front indicator-lamp (optional),
2 pieces rear 3-functions-lamp (optional).

Extention stop light:
All necessary cables as well as stop light switch.

Contained:
2 pieces confected cables for break light,
1 piece limit switch (left-hand drive), pull switch (right-hand drive).

Prices for complete kit

Model T2 and VL (left-hand steering):	from CHF 1000.00	from EUR
Model T2 and VL (right-hand steering):	from CHF 950.00	from EUR
Model T3 and TL (left-hand steering):	from CHF 1100.00	from EUR
Model T3 and TL (right-hand steering):	from CHF 1050.00	from EUR

Use the intended order-form.